March 28, 2024, 05:09:35 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Arturia: Please release the SYSEX implementation for BSP  (Read 6151 times)

atte

  • Jr. Member
  • **
  • Posts: 68
  • Karma: 13
    • a773.dk
Arturia: Please release the SYSEX implementation for BSP
« on: August 08, 2015, 02:31:56 pm »
Title says it all :)

dexter

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 1
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #1 on: August 16, 2015, 12:33:32 pm »
Bump

bufobufo

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 4
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #2 on: August 21, 2015, 05:16:32 pm »
+1

dexter

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 1
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #3 on: October 07, 2015, 07:24:12 pm »
bump

atte

  • Jr. Member
  • **
  • Posts: 68
  • Karma: 13
    • a773.dk
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #4 on: December 27, 2015, 11:54:36 pm »
re-bump. thoughts from Arturia on this?

Matulski

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #5 on: January 14, 2016, 08:33:04 am »
+1

nnay13

  • Apprentice
  • Apprentice
  • *
  • Posts: 13
  • Karma: 1
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #6 on: January 16, 2016, 10:10:25 am »
+1

atte

  • Jr. Member
  • **
  • Posts: 68
  • Karma: 13
    • a773.dk
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #7 on: April 05, 2016, 11:15:22 pm »
bump

nnay13

  • Apprentice
  • Apprentice
  • *
  • Posts: 13
  • Karma: 1
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #8 on: April 08, 2016, 02:26:20 pm »
Re-Re Bump

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #9 on: April 08, 2016, 05:30:58 pm »
I can't see this happening guys as i think the firmware is sent in sysex . have you tried looking at the midi console to see the data in the mcc


Terrym
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

t-scale

  • Newbie
  • *
  • Posts: 2
  • Karma: 0

t-scale

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #11 on: September 29, 2016, 10:47:42 am »
so far, im only able to see SySex data from STOP/PLAY/PAUSE on MIDI monitor..
would be extremely handy to be able to change more parameters likes pattern nbr, length etc.. via sysex..

could anyone confirm whether this is possible or not? please

PS: arturia, the number of views of this topic tells you how bad BSP users want this ;)
« Last Edit: September 29, 2016, 10:49:25 am by t-scale »

funktree

  • Apprentice
  • Apprentice
  • *
  • Posts: 24
  • Karma: 0
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #12 on: March 09, 2017, 03:46:05 am »
http://www.untergeek.de/2014/11/taming-arturias-beatstep-sysex-codes-for-programming-via-ipad/

does this apply to the BSP?
From my experience it will ... you WILL need to change one byte, the product id and sysex will most likely work. ...Assuming arturia is NOT changing the message identifier between beat step and beat step pro. If you have an iPad or iPhone you can try this using MIDI controller pro (I use it for JD-xi and it works very good) to generate sysex using sliders values to tweak the sysex you find the correct message (reverse engineering) pretty fast.

I wish I had more time I would try this...

gbravetti

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 1
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #13 on: April 15, 2017, 04:25:06 pm »
+1

...Because asking for open source will be too much probably.

dznqbit

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: Arturia: Please release the SYSEX implementation for BSP
« Reply #14 on: July 05, 2017, 10:34:03 am »
Hello! I love the BSP!

+1 for the sysex implementation please! Thanks  :)

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines