March 28, 2024, 10:01:51 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Sync Minibrute, Beatstep and Volca Sample?  (Read 3262 times)

autoshot23

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Sync Minibrute, Beatstep and Volca Sample?
« on: January 07, 2016, 11:53:49 am »
Hello, my apologies if this is in the wrong forum.

Can someone help me out syncing these 3 items?

I would like to program sound from the minibrute into step sequences on the beatstep and have it be in tempo/sync with the volca sample.

Thanks for any help you can offer!

dolphins

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: Sync Minibrute, Beatstep and Volca Sample?
« Reply #1 on: January 19, 2016, 08:46:39 pm »
The quickest way is to use MIDI to sync the Volca Sample and CV/gate to sequence the MiniBrute. Connect a MIDI cable from the Beatstep to your Volca Sample using the minijack-to-DIN adapter supplied with the Beatstep. Then connect monophonic 3,5mm patch cables from Beatstep's CV and Gate outputs to your MiniBrute's pitch and gate inputs.

However, MIDI in Volca Sample is implemented so that channels 1-10 represent samples 1-10, so you have to use the MIDI Control Center software to change the sequencer channel somewhere between 11-16. Otherwise the sequencer will also play one of the samples.

I hope this helps! :)

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines