November 29, 2014, 06:15:39 am
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Arturia's webmaster is glad to offer you these brand new forums ! Have fun using it and feel free to email any encountered problem at webmaster@arturia.com.

Arturia Forums



Author Topic: Spark 2.0.1 Beta  (Read 5999 times)

mixalis

  • Apprentice
  • *
  • Posts: 39
  • Karma: 0
Re: Spark 2.0.1 Beta
« Reply #90 on: July 21, 2014, 07:32:29 pm »
There is a bug at the roller too in 2.0.1 !   When you mess with the roller and press it so it changes mode, from roller to filter/resonance to pan/volume  it stucks and  the roller goes to hold mode  ....To resolve it you have to press shift and the roller to go to touch mode again.... 

I dont know if its in your bug list.... 

 Thanks!!

terrym

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 478
  • Karma: 59
    • soundcloud.com/logicaldream
Re: Spark 2.0.1 Beta
« Reply #91 on: July 21, 2014, 10:28:57 pm »
I think you answered this your self , sounds like your putting the fx in to latch mode then you are releasing it for touch mode as described  in the manual page 28.

regards

terry

Terry
aka Logicaldream

mixalis

  • Apprentice
  • *
  • Posts: 39
  • Karma: 0
Re: Spark 2.0.1 Beta
« Reply #92 on: July 22, 2014, 12:46:43 pm »
No... this is not what i do.. I am not putting the fx to latch mode, i am just trying to change what the fx does(by just clicking the roller button.Not shift and the roller!) ..and as i do this it stucks to latch mode...

ben arturia

  • Administrator
  • Hero Member
  • *****
  • Posts: 540
  • Karma: 32
Re: Spark 2.0.1 Beta
« Reply #93 on: July 23, 2014, 01:25:37 pm »
Hi Mixalis,
I'm not able to reproduce your bug...
Could you explain how does this happens ?
I've been trying to click roller while playing with pad but it works.
.......testing.......

mixalis

  • Apprentice
  • *
  • Posts: 39
  • Karma: 0
Re: Spark 2.0.1 Beta
« Reply #94 on: July 25, 2014, 12:14:11 pm »
Hi Ben!   Well i played today again and i found out that the roller is always stuck in lanch mode..

So basically touch mode doesnt work for me! At least on this Version...   

Is there something i dont see here? Have you changed how the roller works on this version?

mixalis

  • Apprentice
  • *
  • Posts: 39
  • Karma: 0
Re: Spark 2.0.1 Beta
« Reply #95 on: August 10, 2014, 10:14:44 am »
So do you confirm this change in the roller or not?  ???

terrym

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 478
  • Karma: 59
    • soundcloud.com/logicaldream
Re: Spark 2.0.1 Beta
« Reply #96 on: August 10, 2014, 10:23:28 am »
Hi maxalis, i do not have this bug .what controller are you using spark or sparkle? or is this on the software only .give me some more info and i will see if i can find your problem on my setup.

regards

terrym
Terry
aka Logicaldream

mixalis

  • Apprentice
  • *
  • Posts: 39
  • Karma: 0
Re: Spark 2.0.1 Beta
« Reply #97 on: August 12, 2014, 12:11:15 pm »
I use Spark cdm ... I dont know what more to say here..... My roller does not function like it used to ...I cannot touch and roll.. If i am in the roller it only lanches the rolls

napishu

  • Apprentice
  • *
  • Posts: 25
  • Karma: 1
Re: Spark 2.0.1 Beta
« Reply #98 on: August 15, 2014, 06:55:20 am »
Hi. Will the new spark updates?

LukeWright

  • Apprentice
  • *
  • Posts: 12
  • Karma: -1
Re: Spark 2.0.1 Beta
« Reply #99 on: August 19, 2014, 07:48:42 am »
(Using SparkLE Mac Maverics, Ableton live 9)

The only thing thats better about spark 2 is the reliability, it crashes less often than 1.7.2 (which was always, every time i open it)
BUT! the interface is a major step backwards on the main virtual controller panel (1.7 was much more satisfying for me) and the automatic screen focus SUCKS SO MUCH!! I cannot express this enough... When the screen changes when I press the proj, kit and instr buttons it's all great and well, but unlike ver 1.7, when I press a button (say, filter etc or any other main screen control) IT SHOULD CHANGE BACK! Just like the old version... If 1.7 would work for me (which it wont, at all...) I'd use it instead of 2.0.1.

Please fix this issue it's driving me nuts!

terrym

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 478
  • Karma: 59
    • soundcloud.com/logicaldream
Re: Spark 2.0.1 Beta
« Reply #100 on: August 19, 2014, 05:40:35 pm »
I use Spark cdm ... I dont know what more to say here..... My roller does not function like it used to ...I cannot touch and roll.. If i am in the roller it only lanches the rolls

HI i tested this on the cdm and its a bug , i will send a report to arturia ,sorry i did nt get back on this but i have been on holiday . i also use cdm but not spent much time due to testing other things.
cheers

terrym
Terry
aka Logicaldream

kcearl

  • Full Member
  • ***
  • Posts: 218
  • Karma: 35
Re: Spark 2.0.1 Beta
« Reply #101 on: August 20, 2014, 05:55:32 am »
The seq step pads are still broken  they still only show
steps 1-16 and 33-48    17-32 and 49-64   don't show
this is a big problem in the GUI



this is nipping my head, Im a step sequencer junky and this is annoying as hell...

turbo_kev

  • Jr. Member
  • **
  • Posts: 57
  • Karma: 2
Re: Spark 2.0.1 Beta
« Reply #102 on: August 22, 2014, 09:21:01 pm »
Iv been telling them about this problem for ages
and so far nobody from Arturia has even acknowledged
that this is a bug and has been for a very long time

Any body from Arturia care to say that this at least being worked on

cheers
kevin
Avitar  is  Jean Michel jarre & Me. In my home having a meeting about the Docklands Concert

Spark LE
V Collection
BeatStep
Cubase
win 7 ult 64 bit  quad core 8 gig ram

terrym

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 478
  • Karma: 59
    • soundcloud.com/logicaldream
Re: Spark 2.0.1 Beta
« Reply #103 on: August 22, 2014, 09:47:43 pm »
Hi all , just let you know I'm only a beta tester for arturia ,I've not received any new software from arturia yet , i know bens on holiday and i think kevins around as he logged in tonight.
maybe some one from arturia can shed some light on the next software update.


terrym

Terry
aka Logicaldream

mixalis

  • Apprentice
  • *
  • Posts: 39
  • Karma: 0
Re: Spark 2.0.1 Beta
« Reply #104 on: August 24, 2014, 08:32:11 pm »
I use Spark cdm ... I dont know what more to say here..... My roller does not function like it used to ...I cannot touch and roll.. If i am in the roller it only lanches the rolls

HI i tested this on the cdm and its a bug , i will send a report to arturia ,sorry i did nt get back on this but i have been on holiday . i also use cdm but not spent much time due to testing other things.
cheers



terrym

All good! No problem...i just wanted to make sure that it wasnt just me... Thanks

 

Carbonate design by Bloc
SMF 2.0.8 | SMF © 2014, Simple Machines