March 04, 2015, 01:23:22 am
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Arturia's webmaster is glad to offer you these brand new forums ! Have fun using it and feel free to email any encountered problem at webmaster@arturia.com.

Arturia Forums



Author Topic: Spark Improvements!  (Read 16935 times)

stuart

  • Spark Moderator
  • Hero Member
  • ******
  • Posts: 528
  • Karma: 19
Re: Spark Improvements!
« Reply #135 on: December 23, 2014, 11:16:39 pm »
1.7.2 was alright actually, but I think this is the point I'm making. The CDM functionality has been forgotten about really because the introduction of SparkLE. The software has to straddle the two hardwares and essentially falling short for the CDM.

There's stuff that others will find more important but thread after thread users assume you're just talking about the software. There should be a board dedicated to each piece of hardware.

I did spent hours of time emailing arturia talking about the workflow for v2, the scroll wheel on the unit didn't do anything and it was decided that the shift number combination were to be the main way to get into menus, replacing the hardware know which was the original workflow.

There's next to no reporting on the unit, and where there is reporting there is no continuity.

But I'm getting a bit bored of constant lobbying

Anyway, hopefully we can move forward with this

Thanks, Stuart
Mac, Pro Tools
Spark CDM, Minibrute, Analog Laboratory 61, Beatstep

cybervertigo

  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Spark Improvements!
« Reply #136 on: December 28, 2014, 02:16:28 am »
1) 16 pads on the hardware is just like the software has. That would enable users to play more sounds in real time.

2) Able to use more than 16 sounds per project. A simple solution would be a dedicated button. It can be called Group, Sounds, Kits etc... When that dedicated button is selected the 16 step buttons each become Groups of 16 sounds. The user would easily be able to jump from 16 sounds to another 16 sounds, and would enable the user to have more sounds available per project. At 16x16, that can be up to 256 sounds per project (if needed). Please see pic for more details.

3) In the Loop section, by adding that new button would help create another feature... Rather than just have the option to dial through loop parts, also have a way to jump to specific parts of the loop. That would be great for both live performances and recording. A simple solution can be to add a dedicated Select button to activate this feature. The 6 Mode buttons can then become selections for the Divide (1/2, 1/4, 1/8, 1/16, 1/32, 1/64). The Copy button can be Steps 1-16, Erase can be Steps 17-32, Seq. Positions can be 33-48 and 49-64. The 16 Step buttons can be a specific step from 1-64 depending on the Step Groups selection. Basically the user can have up to 4 Step Groups, depending on which Divide selection is being used. For a Divide of 1/2, 1/4, 1/8, 1/16 the 16 Step buttons can light up lightly, and the selected step light up brighter. A Divide of 1/32 would only need 2 Step Group buttons. 1/64 would need 4 Step Group buttons. Please see pic for more details.
« Last Edit: December 28, 2014, 06:26:19 am by cybervertigo »

stuart

  • Spark Moderator
  • Hero Member
  • ******
  • Posts: 528
  • Karma: 19
Re: Spark Improvements!
« Reply #137 on: December 28, 2014, 06:14:40 pm »
1) 16 pads on the hardware is just like the software has. That would enable users to play more sounds in real time.


Do you have more than 8 fingers?  ;)

Thanks, Stuart
Mac, Pro Tools
Spark CDM, Minibrute, Analog Laboratory 61, Beatstep

cybervertigo

  • Apprentice
  • *
  • Posts: 6
  • Karma: 0
Re: Spark Improvements!
« Reply #138 on: December 28, 2014, 10:50:07 pm »
1) 16 pads on the hardware is just like the software has. That would enable users to play more sounds in real time.


Do you have more than 8 fingers?  ;)

Thanks, Stuart

Absolutely, lets not forget the thumbs! 8 fingers give 2 thumbs up to 16 pads. ;)

Thanks,
Jeff

Szlartibartfaszt

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Spark Improvements!
« Reply #139 on: January 04, 2015, 02:31:57 pm »
Hi everybody!

What I'm writing is not really about improvement but rather fixing serious flaws. Unfortunately there is no sticky in the technical issues section ( Hmm, I wonder why :D ).

I've spent most of last week on the modular page of Spark, and have found some real fun killers.
The randomly "jumpy" modules are the least annoying of them.
A bit more problematic but at least constant phenomenon is that when I insert a cable in the FM input of an oscillator, the pitch of the modulated oscillator jumps 2 octaves up.
The CV Modulator can't multiply the signal as you state in the manual because the highest gain value is 0 dB. Well, it would be good if it could.
The bipolar/unipolar switching of modulations doesn't work. Setting it to unipolar still sounds like bipolar when turned anti clockwise. It's just a bit softer.
Halfway synthesizing a gong sound I got this message: "Unable to add module. You have reached the maximum number of modules." - Seriously? In a software? In 2015? ( Okay it was released in 2014 )
And limiting the number of individual module types too? Okay, the number of oscillators filters, LFOs will probably be enough, but I'd like to use more Springmasses to create more complex sounds with different and differently evolving parts.
And with evolving we have arrived to what I really can't comprehend.
Who's authorized these envelopes? I mean, sit back, relax and imagine you've just got a real hardware modular synth. You unbox it and see that most of the controls are behind little doors which you have to open every time you want to modify the settings, and there are insert points that aren't even connected to anything. I give you 1 hour and the whole stuff lands in the bin.
Envelopes are really basic and frequently used sound shaping tools. You have to be able to see and control ALL of the parameters directly. It's even more important when we get a "multi stage envelope" as in the manual ( with not a single word about what it does and how the signal changes from A to R ) instead of a standard and easy to understand ADSR envelope. I'm using more envelopes to control different parts of a sound, so this assigning-to-macro thing simply doesn't work. I can't assign 30+ parameters to six knobs. Six macros can be enough for live performance but not for sound design. Every envelope has to have all their controls available on the modules.
And just for curiosity's sake, what should we do with a Sustain modulation input when we can't set the Sustain? ( And probably don't even have. )
Come on Arturia! You can do better! I've spent the past half year working with your synths, and I've learnt a lot about synthesis itself thanks to you. Now I'd really like to use Spark as well. It's Modular part is way better and more versatile than Maschines drum synths. But these shortcomings are beating all the fun out of it.

Best Regards,
Balázs Várszegi

 

Carbonate design by Bloc
SMF 2.0.8 | SMF © 2014, Simple Machines