April 20, 2024, 10:35:05 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Lab 61 Dimensions?  (Read 2575 times)

jamusic1983

  • Apprentice
  • Apprentice
  • *
  • Posts: 8
  • Karma: 1
Lab 61 Dimensions?
« on: June 01, 2012, 08:18:49 pm »
Hello,

Can anyone give me the true dimensions of the Lab 61? 

I didn't see them listed in the specs on the product page, and there are conflicting ones around the internet.

Thank you,

Jim

Manuel

  • Sr. Member
  • ****
  • Posts: 331
  • Karma: 1
  • GTHC-Entertainment
    • MySpace
Re: Lab 61 Dimensions?
« Reply #1 on: June 01, 2012, 11:32:59 pm »
According to Thomann = (BxHxT): 881 x 70 x 245 mm

http://www.thomann.de/de/arturia_ae_the_laboratory_61.htm

jamusic1983

  • Apprentice
  • Apprentice
  • *
  • Posts: 8
  • Karma: 1
Re: Lab 61 Dimensions?
« Reply #2 on: June 02, 2012, 05:29:45 am »
Yes, I saw that when I went searching, but 70 mm = just 2.76 inches high.

Maybe for the body, but I don't think that covers the knobs height as well.

Another site had it at 4.4 inches, which is much more believable.

As I said, there are conflicting measurements all over the web.

Too bad Arturia doesn't say.

You'd think they'd include it on the Spec. Tab page like on the 49.

But thanks for your reply.

Jim

JDoo

  • Beta-testers
  • Full Member
  • *
  • Posts: 130
  • Karma: 3
Re: Lab 61 Dimensions?
« Reply #3 on: June 02, 2012, 07:46:18 pm »
Jim -

The 2.76" for total height (including knobs) was about right.  The knobs add about 5/8" to the height.  I recently picked up the Lab 61 and have a very tight desktop drawer I had to fit it into.  Total height of my drawer is 3 1/4" .  The Laboratory 16 slides in, with about 3/8" to spare (measuring from the top of the drawer, down to the top of the knobs).  I just held up a tape and verified this..


hth

Joe

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines