November 28, 2014, 02:37:25 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Arturia's webmaster is glad to offer you these brand new forums ! Have fun using it and feel free to email any encountered problem at webmaster@arturia.com.

Arturia Forums



Author Topic: Pad re-triggering  (Read 837 times)

monchai

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Pad re-triggering
« on: July 12, 2011, 08:57:07 am »
Hi there

Does anyone have the same problem as I did, the trigger pad re-triggered itself once every few times (1 out of 10 times I hit the pad). especially on pad no 1 and 2 also many happen to samples I load in myself. also it didn't happen every time I on Spark too only sometime (I turn off and then on again). Not sure why it's like this, Please, anyone knows of the cause or how to fix this?

thanks

jpbfb

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Pad re-triggering
« Reply #1 on: July 12, 2011, 02:07:01 pm »
I have noticed the same thing. If I hit hard pad number 2 the pad 1 also reacts sometimes.
As if it's too sensitive or something.
« Last Edit: July 12, 2011, 02:09:27 pm by jpbfb »

MR909

  • Apprentice
  • *
  • Posts: 33
  • Karma: 1
    • Cult of Janelle
Re: Pad re-triggering
« Reply #2 on: July 21, 2011, 12:52:12 am »
I had the same problem with pad 8, I noticed it in the first 2 hours of using my spark, I took it back straight to the shop and had it replaced with a new unit. New one working no problems, so leads me to think that it is purely a hardware issue

Lisapower1

  • Jr. Member
  • **
  • Posts: 72
  • Karma: 5
Re: Pad re-triggering
« Reply #3 on: January 10, 2012, 08:05:19 pm »
This is because the Pad's are on the same piece, you can try it by moving 1 pad from left to right and you will notice that the other pad's will move to. cheers

Amy

  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: Pad re-triggering
« Reply #4 on: January 11, 2012, 09:03:02 am »
Very helpful.. thanks!

kempkeith

  • Beta-testers
  • Apprentice
  • *
  • Posts: 18
  • Karma: 2
Re: Pad re-triggering
« Reply #5 on: January 11, 2012, 05:32:01 pm »
This is because the Pad's are on the same piece, you can try it by moving 1 pad from left to right and you will notice that the other pad's will move to. cheers

on the same piece? can you explain that a bit further?  I feel I'm having a similar problem and I really don't understand your explanation.

Lisapower1

  • Jr. Member
  • **
  • Posts: 72
  • Karma: 5
Re: Pad re-triggering
« Reply #6 on: January 17, 2012, 12:45:55 am »
sorry my english is not so good.

you can put one Finger on a Pad and move it (Up, Down, Left Right) no matter. you will notice that all other pads are moving to. The Spark build inside is not that good. i think.

 

Carbonate design by Bloc
SMF 2.0.8 | SMF © 2014, Simple Machines