March 28, 2024, 10:54:42 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: [Solved] Transports: can't get to sync with Logic X  (Read 7420 times)

jayzeroj0

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
[Solved] Transports: can't get to sync with Logic X
« on: February 23, 2014, 12:28:35 am »
I've got my KeyLab 49 plugged via MIDI cable to my Scarlett 2i4... and all running into Logic X.
Everything, for the most part, seems to be working as anticipated but I CAN NOT get the transports to sync.

I tried sync'ing with "Listen to MMC Input"... I tried manually mapping transport buttons to Key Commands and NOTHING works... Please help?
« Last Edit: June 21, 2017, 11:55:54 am by ben arturia »

ctheory

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Transports: can't get to sync with Logic X
« Reply #1 on: February 26, 2014, 07:28:49 pm »
Hey man i got the exact same problem...

Everything seems fine with MIDIControlCenter but whatever i do Logic Pro X doesn't react to transport keys.

ben arturia

  • Administrator
  • Hero Member
  • *****
  • Posts: 822
  • Karma: 31
Re: Transports: can't get to sync with Logic X
« Reply #2 on: March 20, 2014, 05:04:16 pm »
    Hi guys,
    I have no transport problems with Logic X and keylab.
    Please follow those step and post me your answer :



    You should have a MMC Play message

    In Logix X

    • Go to preferences
    • Click on MIDI
    • Then on Sync
    • Click on "MIDI Sync Project Settings"
    • In the new window check "Listen to MMC input" under MIDI Machine Control menu


    Also check you Logic X version. Latest version is 10.0.6 i guess
.......testing.......

Jgreazy

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Transports: can't get to sync with Logic X
« Reply #3 on: April 21, 2014, 03:38:05 am »
The MMC messages are only transmitted when connected by USB. How can I transmit MMC over MIDI cables? Is there a new version of the unified midi control centre that runs on Mac OSX 10.6.8 snow leopard that will allow me to program the correct MMC? I am currently running the old midi control centre. I have run a midi monitor app that confirms no MMC are being transmitted except for the LOOP button which sends a "Reset" message. Any help would be appreciated.

ben arturia

  • Administrator
  • Hero Member
  • *****
  • Posts: 822
  • Karma: 31
Re: Transports: can't get to sync with Logic X
« Reply #4 on: April 22, 2014, 08:50:48 am »
Hi Jgreazy,
Sorry there is no new update for the MCC.
You can manually set you transport button to send MMC directly via hardware.

Or try to restore another memory press edit then choose keyboard preset.
.......testing.......

DaveWT

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 0
Re: Transports: can't get to sync with Logic X
« Reply #5 on: June 20, 2017, 10:04:28 am »
Hi,

thanks for the above suggestions, they have gotten my rewind, ff, play and record working, but not stop. When i checked the signals coming out of Midi Control Center I noticed that each of the transport controls that is working has MMC <appropriate transport control here> (see below) while the Stop button just says MMC.


(this was copied straight out of Midi Control Center)
 In:  F0  7F  7F  06  05  F7  |  MMC Rewind
 In:  F0  7F  7F  06  04  F7  |  MMC Fast Forward
 In:  F0  7F  7F  06  66  F7  |  MMC
 In:  F0  7F  7F  06  02  F7  |  MMC Play
 In:  F0  7F  7F  06  06  F7  |  MMC Record Strobe

I tried to assign a midi control to this button but it appears that logic doesn't operate this way for transport controls.

Any ideas?

ben arturia

  • Administrator
  • Hero Member
  • *****
  • Posts: 822
  • Karma: 31
Re: Transports: can't get to sync with Logic X
« Reply #6 on: June 20, 2017, 10:17:17 am »
Hi DaveWT,
Something is wrong with your stop message.
It should be:
In:  F0  7F  7F  06  01  F7  |  MMC STOP

What you can try is:
- Press Stop button
- Press Edit button
- Press CC button
- Num should be 1 if not turn Value/Preset  knob and set on 1. Then validate by pushing the encoder
- Press Edit in order to exit config

=> Now test your Stop button should send the right message.

If it's not working try to make a reset factory by holding octave down and up while booting (this will reset all memories to default.)

Best

.......testing.......

DaveWT

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 0
Re: Transports: can't get to sync with Logic X
« Reply #7 on: June 21, 2017, 10:33:05 am »
Solved!

thanks a million.

happy musicing

ben arturia

  • Administrator
  • Hero Member
  • *****
  • Posts: 822
  • Karma: 31
Re: [Solved] Transports: can't get to sync with Logic X
« Reply #8 on: June 21, 2017, 11:56:41 am »
 ;D Have a nice day ! ;)
.......testing.......

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines