March 19, 2024, 09:21:17 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Spark 2 gui?  (Read 5254 times)

kcearl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 35
Spark 2 gui?
« on: February 07, 2014, 03:20:36 pm »
Will the Spark 2 software have a gui option for the original Spark?

I notice theres no option to buy the original hardware so i guess its being phased out, would be nice to have the same gui in the next update though...

mrfugu

  • Apprentice
  • Apprentice
  • *
  • Posts: 36
  • Karma: 0
Re: Spark 2 gui?
« Reply #1 on: February 14, 2014, 04:26:06 pm »
Yes, More information about the SparkCDM hardware and Spark 2 would be great. As would some word about the Beta process for 2.0.

thanks!

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Spark 2 gui?
« Reply #2 on: February 15, 2014, 08:23:01 am »
Hi guys , i.m pushing arturia to keep the original gui of the cdm as i still use it as my main controller for spark , why not let your opinion be heard here! do you want to keep it?


regards

Terrym
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

kcearl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 35
Re: Spark 2 gui?
« Reply #3 on: February 15, 2014, 11:18:18 am »
damn right...its essential ;)

ensoniq

  • Newbie
  • *
  • Posts: 1
  • Karma: 1
Re: Spark 2 gui?
« Reply #4 on: February 15, 2014, 05:28:37 pm »
A very important question. Otherwise, I want to sell my Spark hardware. If future developments are not intended for the big Spark controller. Please give some more information about this.

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Spark 2 gui?
« Reply #5 on: February 15, 2014, 06:40:03 pm »
The controller will be fully supported in spark2 its just i was asked if the gui is needed still.
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

kcearl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 35
Re: Spark 2 gui?
« Reply #6 on: February 16, 2014, 04:51:58 am »
well we had to put up with that pesky sparkle gui on "our" software!!!!


 ;D


but seriously, it is needed...Ive already had Maschine totally dissapoint me with their update, dont let Spark do it too

kcearl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 35
Re: Spark 2 gui?
« Reply #7 on: February 22, 2014, 01:10:11 am »
Any word?

Kevin

  • Hero Member
  • *****
  • Posts: 1.545
  • Karma: 82
    • http://www.arturia.com
Re: Spark 2 gui?
« Reply #8 on: February 24, 2014, 12:23:42 pm »
Hi,
we will keep the old Spark GUI as as skin for the main panel.

Kevin
Kevin
Soft Arturia

kcearl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 35
Re: Spark 2 gui?
« Reply #9 on: February 24, 2014, 01:52:19 pm »
yay Kevin...good news!  ;D

mpc60champ

  • Beta-testers
  • Jr. Member
  • *
  • Posts: 93
  • Karma: 3
Re: Spark 2 gui?
« Reply #10 on: February 27, 2014, 06:50:12 am »
Thank You Kevin! ;D

loboloco

  • Apprentice
  • Apprentice
  • *
  • Posts: 22
  • Karma: 2
Re: Spark 2 gui?
« Reply #11 on: March 01, 2014, 03:42:50 pm »
Any news about Spark 2 release date? It's March, but March is a long month...

Kevin

  • Hero Member
  • *****
  • Posts: 1.545
  • Karma: 82
    • http://www.arturia.com
Re: Spark 2 gui?
« Reply #12 on: March 03, 2014, 09:50:31 am »
Hi guys,
we originally planned to have it at the end of March.
But we 'might' be a bit late. However this delay should not be too long.
The version is already tested by a few lucky guys and we might open it to more people soon.
I will keep you in touch as soon as I have more information.

Kevin
Kevin
Soft Arturia

kcearl

  • Full Member
  • ***
  • Posts: 236
  • Karma: 35
Re: Spark 2 gui?
« Reply #13 on: March 03, 2014, 11:13:13 am »
Better late than buggy ;)

Thanks for the update.

mcx

  • Apprentice
  • Apprentice
  • *
  • Posts: 37
  • Karma: 5
Re: Spark 2 gui?
« Reply #14 on: March 11, 2014, 02:38:40 am »
i think they will always support the spark hardware
 i guess they just discontinued it as its got so much under the hood that it should have retailed at 500(i would have paid that) as it is such good value for money
vive le spark

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines