March 28, 2024, 04:41:12 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: How to get random noise to serve as input for cutoff frequency?  (Read 5937 times)

dreamreal

  • Apprentice
  • Apprentice
  • *
  • Posts: 16
  • Karma: 0
How to get random noise to serve as input for cutoff frequency?
« on: September 19, 2013, 07:22:42 pm »
I'm trying to get random cutoff frequencies to apply to a sound after a bit (a la the intro synth on Rush's "The Camera Eye") -- how do you do this with the SEM-V?

dreamreal

  • Apprentice
  • Apprentice
  • *
  • Posts: 16
  • Karma: 0
Re: How to get random noise to serve as input for cutoff frequency?
« Reply #1 on: October 30, 2013, 02:05:51 pm »
Is there no way to feed the subosc into the cutoff frequency? No sample/hold capability? I found a review that complimented the SEM-V's ability to do sample/hold, but couldn't find a reference to it in the manual.

Examigan

  • Apprentice
  • Apprentice
  • *
  • Posts: 8
  • Karma: 0
Re: How to get random noise to serve as input for cutoff frequency?
« Reply #2 on: February 15, 2014, 12:32:05 pm »
Is there no way to feed the subosc into the cutoff frequency? No sample/hold capability? I found a review that complimented the SEM-V's ability to do sample/hold, but couldn't find a reference to it in the manual.

Just saw this older post here, as I just joined    :)

I am thinking to use the 8-voice programmer set to vary the cutoff. It wouldn't be totally random though...let me check it out.

Examigan

  • Apprentice
  • Apprentice
  • *
  • Posts: 8
  • Karma: 0
Re: How to get random noise to serve as input for cutoff frequency?
« Reply #3 on: February 15, 2014, 01:48:06 pm »
https://soundcloud.com/examigan/sem-v-sample-and-hold-example

Besides the 8-voice part of it (cutoff set to a semi-random pattern,  and the direction set to Random), you also have to turn on the Arp or it wont work. I set the rate to 5.88 hz, Sync=Off, Mode=Up, Octave setting =1


I also added a  little of B2 reverb on this.
« Last Edit: February 15, 2014, 06:27:30 pm by Examigan »

dreamreal

  • Apprentice
  • Apprentice
  • *
  • Posts: 16
  • Karma: 0
Re: How to get random noise to serve as input for cutoff frequency?
« Reply #4 on: April 28, 2014, 05:44:16 pm »
Ha! That's an awesome idea, and one I'd not thought of. It actually works, although it's a little hacky for an operation the SEM should be able to do innately and per-voice.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines