December 22, 2014, 01:46:06 am
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Arturia's webmaster is glad to offer you these brand new forums ! Have fun using it and feel free to email any encountered problem at webmaster@arturia.com.

Arturia Forums



Author Topic: Spark LE pads double triggering  (Read 557 times)

apm

  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Spark LE pads double triggering
« on: August 25, 2013, 03:30:21 pm »
Anyone else with a SparkLE getting this issue? I think I might have a faulty unit as the pads are double triggering - mostly noticable on pad 1, but is also happening on pad 2 but not as bad as pad 1

I've done a video and I was hitting the pad firmly so it's not a bounce back and as you can see from the light its triggering twice. This does not happen at all if I click the pad in the UI

http://www.youtube.com/watch?v=VAKKLm2uizI&feature=youtu.be

Any suggestions? Is it possibly a faulty unit?

Thanks
Adam

Kevin

  • Administrator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 82
    • http://www.arturia.com
Re: Spark LE pads double triggering
« Reply #1 on: August 26, 2013, 09:15:45 am »
Hi Adam,
to confirm that it is a hardware issue, could you try to reproduce it without Spark software.
You can use either MIDI Monitor (Mac) or MIDI-OX (Windows)
Kevin
Soft Arturia

apm

  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Spark LE pads double triggering
« Reply #2 on: August 26, 2013, 07:25:05 pm »
Yes getting the same issue using MIDI Monitor - this is two physical taps - resulting in doubles of Note On/Offs - looking at the timing you can see there is about 300~400ms between my taps - is happening on Pad 1 + 2.

Any thoughts?

18:19:47.947   From SparkLE   Note On   1   C3   59
18:19:47.960   From SparkLE   Note Off   1   C3   0
18:19:48.017   From SparkLE   Note On   1   C3   21
18:19:48.038   From SparkLE   Note Off   1   C3   0
18:19:48.406   From SparkLE   Note On   1   C3   76
18:19:48.420   From SparkLE   Note Off   1   C3   0
18:19:48.477   From SparkLE   Note On   1   C3   27
18:19:48.498   From SparkLE   Note Off   1   C3   0
===
18:20:43.587   From SparkLE   Note On   1   C3   33
18:20:43.736   From SparkLE   Note Off   1   C3   0
18:20:44.119   From SparkLE   Note On   1   C3   79
18:20:44.210   From SparkLE   Note Off   1   C3   0
18:20:44.669   From SparkLE   Note On   1   C3   38
18:20:44.681   From SparkLE   Note Off   1   C3   0
18:20:44.738   From SparkLE   Note On   1   C3   52
18:20:44.788   From SparkLE   Note Off   1   C3   0
===
18:21:28.445   From SparkLE   Note On   1   C#3   79
18:21:28.458   From SparkLE   Note Off   1   C#3   0
18:21:28.515   From SparkLE   Note On   1   C#3   31
18:21:28.556   From SparkLE   Note Off   1   C#3   0
18:21:28.892   From SparkLE   Note On   1   C#3   92
18:21:29.035   From SparkLE   Note Off   1   C#3   0

terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 506
  • Karma: 59
    • soundcloud.com/logicaldream
Re: Spark LE pads double triggering
« Reply #3 on: August 27, 2013, 05:21:22 pm »
Hi are you using spark /le in an daw or standalone ,if your in a daw make sure you check your midi through  as the notes maybe coming back with a delay check in pref if you have pads to midi on  turn this off and try again

terry
Terry
aka Logicaldream
Arturia Tester for spark,analog lab,kl88,matrix12,semv,beatstep,minibrute se,
Also steinberg tester

apm

  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Spark LE pads double triggering
« Reply #4 on: August 27, 2013, 07:34:51 pm »
Using it standalone with the SparkLE software - if it was a MIDI loopback problem I think it would happen on all pads but it's very intermittent and only seems to happen on the first two pads.

I've just upgraded the firmware to 1.0.0.3 as suggested in one of your posts to someone else - still happening
« Last Edit: August 27, 2013, 07:50:44 pm by apm »

 

Carbonate design by Bloc
SMF 2.0.8 | SMF © 2014, Simple Machines