March 28, 2024, 11:06:36 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Feature suggestion: trigger sequencer  (Read 6366 times)

noisetheorem

  • Apprentice
  • Apprentice
  • *
  • Posts: 20
  • Karma: 0
Feature suggestion: trigger sequencer
« on: July 21, 2013, 08:07:29 pm »
Simple concept, similar to the voice processor (which is an odd name for a modulation sequencer).  Essentially it's the same thing but with each step simply sending out a trigger if it is on.  This could be used to create voice level trigger patterns.

I'd also really like to see a clock divider in the voice processor so different 'tracks' could run at different rates.


hermitnerd

  • Sr. Member
  • ****
  • Posts: 272
  • Karma: 48
  • Paul Schilling
    • Soundcloud page with synth demos
Re: Feature suggestion: trigger sequencer
« Reply #1 on: August 02, 2013, 06:01:06 pm »

I could be wrong but I think I have been able to use the voice modulator as a triggering device.

noisetheorem

  • Apprentice
  • Apprentice
  • *
  • Posts: 20
  • Karma: 0
Re: Feature suggestion: trigger sequencer
« Reply #2 on: August 02, 2013, 06:08:51 pm »
You can,I imagine, but wouldn't you loose half resolution (so only 4 steps) since you need to cross the zero threshold to trigger again?   

I haven't experimented with this, but I will have to.

hermitnerd

  • Sr. Member
  • ****
  • Posts: 272
  • Karma: 48
  • Paul Schilling
    • Soundcloud page with synth demos
Re: Feature suggestion: trigger sequencer
« Reply #3 on: August 02, 2013, 06:52:15 pm »
Good point, I think you're right! I know I ran into this half resolution issue when (ab)using one of the sequencer "note" outputs as another envelope trigger track. And I'm pretty sure I ran into the same thing with the voice processor.

You can,I imagine, but wouldn't you loose half resolution (so only 4 steps) since you need to cross the zero threshold to trigger again?   

I haven't experimented with this, but I will have to.

noisetheorem

  • Apprentice
  • Apprentice
  • *
  • Posts: 20
  • Karma: 0
Re: Feature suggestion: trigger sequencer
« Reply #4 on: August 02, 2013, 07:19:09 pm »
A work around....use the trigger to retrigger an LFO synched at twice the resolution of the trigger.  The only thing there is you will always get double triggers.

Tony

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines