MOD wheel problem

[phk]

Hi

Just received my second Minibrute today, first one had the "raised middle C key" -problem and this one seems to have another problem... 

The MOD-wheel seems to be faulty.

It first kicks in when at appx. 25% and with full power.

The dump from MIDI monitor below confirms this (I moved then wheel from 0 -100% and back a few times).
Edit: I upgraded the FW to 1.0.2.1 but that didn't help.

19:40:09.473   From MiniBrute   Control   1   Modulation Wheel (coarse)   127
19:40:09.473   From MiniBrute   Control   1   Modulation Wheel (fine)   127
19:40:12.824   From MiniBrute   Control   1   Modulation Wheel (coarse)   0
19:40:12.824   From MiniBrute   Control   1   Modulation Wheel (fine)   0
19:40:13.639   From MiniBrute   Control   1   Modulation Wheel (coarse)   127
19:40:13.639   From MiniBrute   Control   1   Modulation Wheel (fine)   127
19:40:15.045   From MiniBrute   Control   1   Modulation Wheel (coarse)   0
19:40:15.045   From MiniBrute   Control   1   Modulation Wheel (fine)   0


/Peter

[Thunderroad75]

The mod wheel on my minibrute starts to come in at about the 25% mark. Also I have to be very careful if I want just a little bit of modulation. Hopefully one of the Mods will chip in and put your mind at rest.

[phk]

The mod wheel on my minibrute starts to come in at about the 25% mark. Also I have to be very careful if I want just a little bit of modulation. Hopefully one of the Mods will chip in and put your mind at rest.

Thanks for your reply 

I'm returning the synth, the wheel simply works as an on/off switch which it shouldn't.

See further down.

[tertior]

you have a mail phk; if the tools don't resolve your problem change your MB.

[phk]

you have a mail phk; if the tools don't resolve your problem change your MB.

Thanks!

Problem solved by calibrating the wheel.

Now fully enjoying my new synth