March 19, 2024, 05:01:26 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: SparkLE Private In/Out Logic Environment problem  (Read 5038 times)

moley

  • Apprentice
  • Apprentice
  • *
  • Posts: 21
  • Karma: 4
SparkLE Private In/Out Logic Environment problem
« on: April 12, 2013, 02:17:42 pm »
I've tried to set the Private In/Out settings in Logic's Environment window, however I'm not seeing what I think I'm supposed to.

I've attached a screenshot...

The controller seems to work okay, but when I hit a pad from the 9-16 range, it will play the corresponding instrument from the 1-8 range. Effectively giving a double note - two instruments at the same time.

Thanks in advance for any help...
« Last Edit: April 12, 2013, 02:28:09 pm by moley »

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: SparkLE Private In/Out Logic Environment problem
« Reply #1 on: April 12, 2013, 04:45:09 pm »
Hi, i had a look at this today and had the same problem ,first i cannot see spark 1 midi out in your environment but what i did was route straight from spark 1 midi out as in my screenshot to the keyboard and move the sum out the way ,i am not a logic user anymore so i,m a bit rusty. this should solve the double hits, may be kevin could answer this problem better as im not sure if the spark midi out is needed as sparkle sends out its own midi without connecting to the gui ,if you still have problems after this you will have to assign each pad a midi note starting from c3/60 .on the first pad.
i also tried turning the spark midi driver off but the just left the sparkle playing different notes.
hope this helps

regards

terrym
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

moley

  • Apprentice
  • Apprentice
  • *
  • Posts: 21
  • Karma: 4
Re: SparkLE Private In/Out Logic Environment problem
« Reply #2 on: April 12, 2013, 05:17:39 pm »
Thank you. I'll try this tonight.

I'm not sure why I can't see Spark 1 midi OUT in the environment.... Strange.




Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: SparkLE Private In/Out Logic Environment problem
« Reply #3 on: April 12, 2013, 05:33:32 pm »
did you try after restarting ?
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

moley

  • Apprentice
  • Apprentice
  • *
  • Posts: 21
  • Karma: 4
Re: SparkLE Private In/Out Logic Environment problem
« Reply #4 on: April 12, 2013, 05:40:12 pm »
Yes, many times....

Is there a preferred sequence to start?

Plug in SparkLE Controller > Start Logic > Start Spark

or

Start Logic > Start Spark > Plug in SparkLE Controller

or another way...  Does it make a difference?

moley

  • Apprentice
  • Apprentice
  • *
  • Posts: 21
  • Karma: 4
Re: SparkLE Private In/Out Logic Environment problem
« Reply #5 on: April 12, 2013, 05:40:52 pm »
Thanks again for taking the time to help... really appreciate it.

moley

  • Apprentice
  • Apprentice
  • *
  • Posts: 21
  • Karma: 4
Re: SparkLE Private In/Out Logic Environment problem
« Reply #6 on: April 12, 2013, 10:29:35 pm »
Terry you are my hero!

I did a system restore from TimeMachine, reinstalled Spark and followed your instructions.

No more double notes.

:D

Thank you so much.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines