December 19, 2014, 04:17:34 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Arturia's webmaster is glad to offer you these brand new forums ! Have fun using it and feel free to email any encountered problem at webmaster@arturia.com.

Arturia Forums



Author Topic: Volume gets down after Changing ENV Speed  (Read 582 times)

sparki

  • Apprentice
  • *
  • Posts: 49
  • Karma: 3
Volume gets down after Changing ENV Speed
« on: January 11, 2013, 03:56:49 pm »
while minibrute is playing and i hit the ENV Speed Fast/Slow Switch, the minibrute gets silent. same issue is when i play around with the amp. env. faders, minibrute also gets silent. i just get it loud again by turn minibrute on/off.
is this a failure or do i something wrong? thats my first analog gear, so i really dont know nothing about it.
____________________________________________________
Arturia Gear: Spark CDM, Minibrute, Microbrute
win7 x64 : intel i7@2ghz : 8gb : nvidea gt555m : focusrite saffire 6

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 687
  • Karma: 27
Re: Volume gets down after Changing ENV Speed
« Reply #1 on: January 14, 2013, 10:43:37 am »
Are you sure that the gate selector on the back is set to KBD mode?
It sounds like you are in Hold
Bruno
Arturia Hardware

sparki

  • Apprentice
  • *
  • Posts: 49
  • Karma: 3
Re: Volume gets down after Changing ENV Speed
« Reply #2 on: January 14, 2013, 04:06:25 pm »
hi bruno, yes its true im on hold. so it is not possible to change the mentioned values on hold mode, without lowering the volume, even if i trigger the keyboard??
« Last Edit: January 14, 2013, 06:18:28 pm by sparki »
____________________________________________________
Arturia Gear: Spark CDM, Minibrute, Microbrute
win7 x64 : intel i7@2ghz : 8gb : nvidea gt555m : focusrite saffire 6

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 687
  • Karma: 27
Re: Volume gets down after Changing ENV Speed
« Reply #3 on: January 15, 2013, 10:32:01 am »
No not possible. It's by design on the envelope:
if you hold the gate (using hold switch, or holding down a key) and lower the sustain, volume will decrease, but it will not increase again until you retrig the envelope. But you can not retrig in hold mode.
Bruno
Arturia Hardware

 

Carbonate design by Bloc
SMF 2.0.8 | SMF © 2014, Simple Machines