March 19, 2024, 03:57:43 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: [RELEASED] Firmware Update Version 1.0.2  (Read 44106 times)

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 501
  • Karma: 34
[RELEASED] Firmware Update Version 1.0.2
« on: January 08, 2013, 02:24:46 pm »
Please find enclosed MiniBrute Firmware Version 1.0.2
thanks to every user that took part in beta testing, you all made great work

Release Note:

Quote
**********************************************
* Arturia MiniBrute Firmware Update V1.0.2.1 *
* November 2012                              *
**********************************************

FIXED:
------
 * LFO rate change according to Tap tempo, in Free synch mode
 * Arp does not work properly if the machine is powered up with Tempo knob at minimum
 * Arp heavy usage make the machine crash
 * Bug in Arp hold mode: list was not always cleaned, even if changed to Off.
 * Bug in Arp time sorted mode: In ON mode, notes were not sorted properly in UP/DNW and RAND.

CHANGED:
--------
 * Midi keyboard Mapping changed: Center C in Octave 0, is now Midi Note 60, instead of 48.


Uncorrected Known Issues:
-------------------------
 * Receiving Midi Channel Configuration, only works on channel 1
 * Bend Range does not send Midi Messages
 * Bend Range reduces reduces Pitch wheel output Midi Values range,
   instead of having full Midi range and apply it to different pitch ranges

Zip file is enclosed, but please note you need to be logged in, to see enclosed file.


You can get the version, and start enclosed MiniBrute Connection software, to update your machine using Firmware tab.

Beta test period is over, and this version as now been officially validated.
Enjoy
Bruno
« Last Edit: March 19, 2013, 09:31:53 am by Bruno@arturia »
Bruno
Arturia Hardware

squil

  • Apprentice
  • Apprentice
  • *
  • Posts: 22
  • Karma: 0
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #1 on: January 17, 2013, 09:25:50 pm »
can't update the firmware. i get this message:
"This file is not an arturia crypted firmware file"

moved the folder and now it worked. thanks a lot for the upgrade!
« Last Edit: January 17, 2013, 09:31:16 pm by squil »

Djab

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #2 on: February 01, 2013, 02:28:28 pm »
I have installed new firmaware update but MIDI transmit channel option doesen't work in my midi chain. When ommiting minibrute my synth(dark energy) recives midi messages on channel 1 and when connetced to minibrute it only responds when i press key on minibrute but doesent respond to midi messages on channel 1. I tried options with recived channel 1,2,3,... and All and none of them works.

Hypnoosi

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #3 on: March 04, 2013, 11:41:21 am »
Hi! i have install 1021 ver firmware! and i wanna share some bug's....

1st is LFO rate in FREE MODE.... it change sometime's after i put "STOP" in my DAW programm (maybe someone have another reason of this bug)... simple like that.... fader stay on 50 ghz... then i push  "STOP" red signal flashes go faster and change rate to up....

2nd
Sometimes i push any note i listern the sound :-), it's OK, but...  then i remove finger from note... i listern one more sound... problem fixed then i reboot my minibrute. it's not hardware bug. I think it's MIDI (i tryed  used the USB cable and midi cable too)



Waiting for solution!

Bruno@arturia

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 501
  • Karma: 34
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #4 on: March 11, 2013, 11:05:03 am »
Hi,
thanks for the feedback.
1st: that's because your daw sptos send ckocls when is Stop. If Mb does not receives the midi clock it switches back to internal clock

2nd: are you sure you daw is not sending back the notes on midi? any other devices connected to mid or USB?
Bruno
Arturia Hardware

The01Habiitat

  • Apprentice
  • Apprentice
  • *
  • Posts: 24
  • Karma: -1
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #5 on: March 12, 2013, 01:42:40 am »
 * Receiving Midi Channel Configuration, only works on channel 1

I think im reading this right, i should only be able to send and receive midi on channel 1? ive been sending and receiving midi on channel 12 as long as ive had it. what am i not understanding?

zerocrossing

  • Apprentice
  • Apprentice
  • *
  • Posts: 24
  • Karma: -1
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #6 on: March 20, 2013, 03:35:39 pm »
Why isn't this the version that's on the Minibrute resources page?  ???

bfoflyer

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #7 on: March 26, 2013, 02:21:21 pm »
After updating the firmware, I noticed that the green LED for the keyboard octave select became noticeably more dim than usual. Is this normal or a known bug and should I try to re-update the unit? Thank you for any responces.

David707

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 0
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #8 on: March 29, 2013, 08:52:41 pm »
Minibrute Failed to update and now does not power up properly. I only get the the octave LEDs lit when powered! Need Help  >:(

David707

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 0
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #9 on: March 29, 2013, 09:19:43 pm »
Sorry for the last post I fixed the problem by trying to update again and it worked! Sorry for for my apparent frustration... :-\

matias_thinKing

  • Apprentice
  • Apprentice
  • *
  • Posts: 36
  • Karma: 2
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #10 on: June 12, 2013, 05:09:38 am »
Hi Bruno and Arturia Team,

if I may, I'd like to humbly request making the configuration area of the MiniBruteConnection software a VST.  It would be most beneficial to have access to curve and lfo response settings without having to close down the DAW.  I would be ok if a DAW and the MBC stand-alone worked side be side too, but I didn't think this would be possible as both softwares would be using the same MIDI channel.  Thank you for your consideation!

dvb116

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #11 on: June 12, 2013, 07:30:03 am »
hi, do I need to update the Minibrute with both updates or just the latest? Love the synth, what a monster!

phk

  • Apprentice
  • Apprentice
  • *
  • Posts: 9
  • Karma: 2
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #12 on: June 16, 2013, 08:05:19 pm »
hi, do I need to update the Minibrute with both updates or just the latest? Love the synth, what a monster!

You just need to run the latest update -it replaces the whole firmware.

Good luck  :)

dvb116

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #13 on: June 18, 2013, 02:25:42 pm »
cheers Phk :) I'll  do it when I  feel brave ;)

UncleToad

  • Apprentice
  • Apprentice
  • *
  • Posts: 11
  • Karma: 4
Re: [RELEASED] Firmware Update Version 1.0.2
« Reply #14 on: June 27, 2013, 05:52:30 pm »
When is the next firmware update planned for release?   v1.0.3 ?
It would be great to have an update that fixed all of the remaining known issues!

Paul

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines