Arturia Forums

Hardware Instruments => MiniBrute => MiniBrute Technical Questions - FAQ => Topic started by: b1n4ry on July 19, 2015, 10:00:50 pm

Title: mono audio output
Post by: b1n4ry on July 19, 2015, 10:00:50 pm
Hi,

how do i get a stereo signal from minibrute`s mono audio output?
My soundcard has two xlr audio inputs.

Thank you
Title: Re: mono audio output
Post by: BodoBrute on July 20, 2015, 02:40:53 pm
how do i get a stereo signal from minibrute`s mono audio output?

You don't. The MiniBrute provides a mono signal (which is routed to both speakers when using the headphone output). It is not a stereo instrument.

If you want to use both inserts of your soundcard you might use an adapter with a stereo 1/4" jack (plugged into the headphone socket) on the one side and 2 XLR plugs on the other one. However, this will give you 'double mono' (i.e. the same signal on both channels), but not stereo.

However, I suggest using just one of the XLR sockets your soundcard provides and leave the rest to your mixer ;).

Have a look here (http://forum.arturia.com/index.php?topic=12105.0) as well, 2nd reply (by Bruno@arturia).