Arturia Forums

Hardware Sequencers => BeatStep => BeatStep - Technical Questions - FAQ => Topic started by: triff on July 03, 2014, 12:12:38 am

Title: CNTRL mode and midi control center problem
Post by: triff on July 03, 2014, 12:12:38 am

my problem is simple, i'd like to setup my beatstep in CNTRL mode, but when i hit the first pad on the beastep, the second one is trigged in the MMC, and when i hit the second pad on the beatstep, the third one is trigged in MMC, etc...etc...

it's unusable! How can i do a global reset of the beastep?
How can i solve this?

Thanks!

Title: Re: CNTRL mode and midi control center problem
Post by: Jerome Arturia on July 03, 2014, 09:02:10 am

Hi!

Here's how to proceed to set your Beatstep back to default setup:

1/ Connect Your beat Step
2/ Open the MCCU:
==> http://www.arturia.com/downloads/mccu/
3/ Click on the "Sync" button
4/ Under Templates TAB/Factory Templates, Select "Default"

Let me know if you need further help!

Title: Re: CNTRL mode and midi control center problem
Post by: triff on July 03, 2014, 01:05:24 pm

Thanks Jerome!

i will try that...

And what can you say about my last post in the top topic: ressources for daws?
Seems that the beatstep have some trouble to be sync with a daw, or there's a kind of trick i guess?

Title: Re: CNTRL mode and midi control center problem
Post by: SoundQuant on July 12, 2014, 07:59:47 pm

Got the same problem. I fixed it by installing a older firmware version (Beat-Step-v1.0.1.4-20140311.led.zip).
I think it is a error in the new firmware version.

Title: Re: CNTRL mode and midi control center problem
Post by: Terrym on July 12, 2014, 10:08:27 pm

HI, i tested this, and i do not have this problem.

Title: Re: CNTRL mode and midi control center problem
Post by: m.janowski on January 19, 2015, 11:33:01 pm

Quote from: Jerome Arturia on July 03, 2014, 09:02:10 am

Hi!

Here's how to proceed to set your Beatstep back to default setup:

1/ Connect Your beat Step
2/ Open the MCCU:
==> http://www.arturia.com/downloads/mccu/
3/ Click on the "Sync" button
4/ Under Templates TAB/Factory Templates, Select "Default"

Let me know if you need further help!

Hi Jerome. My Tab is just empty. I don't have any Factory Templates.

Title: Re: CNTRL mode and midi control center problem
Post by: WattSekunde on February 01, 2015, 06:37:42 pm

Quote from: SoundQuant on July 12, 2014, 07:59:47 pm

Got the same problem. I fixed it by installing a older firmware version (Beat-Step-v1.0.1.4-20140311.led.zip).
I think it is a error in the new firmware version.

Where can I find older firmware files?

Thanks!